Marantz PM6006 业主指南

You can connect an external IR receiver to the REMOTE CONTROL

connectors to perform operations on this unit with the supplied remote

control unit without visual contact. This might be necessary if the unit is

hidden in a cupboard or corner, so you can’t directly point with the remote

control unit to the device.
To do this, disable the remote control signal receiving function “Setting the

.

RC OUT

Infrared 

retransmitter

Infrared 

sensor

0 When a remote control receiver unit is not connected, be sure to enable the

remote control signal receiving function. Operations cannot be performed with the

remote control if this function is disabled.

You can transmit remote control signals simply by connecting a Marantz

audio device to the REMOTE CONTROL IN/OUT connectors using the

remote connection cable provided with the device.
Set the remote control switch located on the rear panel of the connected

audio component to “EXTERNAL” to use this feature.

.

24