MartinLogan Motion® 2i 业主指南
6
3 Locate mounting location using a level and the
installation template.
4 Mark the pilot hole locations.
5 Drill the pilot holes using a 1/8-inch drill bit. If
5 Drill the pilot holes using a 1/8-inch drill bit. If
a pilot hole DOES NOT hit a stud, widen that
pilot hole using a 1/4-inch drill bit and install
a wall anchor at that location (fig. 8).
pilot hole using a 1/4-inch drill bit and install
a wall anchor at that location (fig. 8).
6 Using the 1.5-inch Phillips screws, mount the
wall brackets as shown. Please note, only the
MartinLogan Motion 4 requires the additional
wall bracket spacer (fig. 8).
MartinLogan Motion 4 requires the additional
wall bracket spacer (fig. 8).
7 Hang the speaker, guiding the wall mount bolt
into the wall bracket’s keyhole.
Fig. 8
(Motion 4i)
(Motion 2i)