Definitive Technology Mythos ST-L SuperTower® 业主指南
16
Definitive Technology 11433 Cronridge Dr. Owings Mills, MD 21117
EN
REMOTE CONTROL
Note: For your convenience, the IR receiver is located on each loudspeaker just below the D’Appolito Array (Midrange/
Tweeter/Midrange complement) near the top of the tower. This location lets you aim your remote at a normal listening height
from any where in the room.
Note: For your convenience, the IR receiver is located on each loudspeaker just below the D’Appolito Array (Midrange/
Tweeter/Midrange complement) near the top of the tower. This location lets you aim your remote at a normal listening height
from any where in the room.
The Mythos ST-Ls remote makes it easy to set just the right amount of bass output to compensate for program material,
listening level differences and room acoustics. The remote is the best tool for perfectly adjusting the built-in subwoofers
to achieve seamless blending with the mid-range drivers.
listening level differences and room acoustics. The remote is the best tool for perfectly adjusting the built-in subwoofers
to achieve seamless blending with the mid-range drivers.
1.
Power ON/Off: Press these buttons to turn the subwoofer on or off.
2.
Mute L/R: Mutes either the left or right subwoofer. Hitting the speaker’s Mute button again,
or the corresponding Bass Level toggle, will take the loudspeaker out of mute.
3.
Left Bass and Right Bass +/–: Increases/decreases the left and right loudspeaker’s subwoofer levels respectively.
Note: the volume range goes from –7 to 0 to +7 and is indicated by the LEDs at the base of the loudspeaker, beneath
the Definitive Technology logo.
the Definitive Technology logo.
4.
Low Level On/Off: Engaging Night Mode compresses the dynamic range so that the peak bass volume level is
reduced—ideal for leaving family members, or neighbors, undisturbed late at night.
5.
Stereo Bass Control: This increases or decreases both loudspeakers’ subwoofer levels simultaneously.
Note: If the line of sight from your listening position to the IR receiver on the loudspeaker is obstructed, the remote will
not work. Connect an IR remote repeater (optional, available from most audio/video specialty dealers) to the IR remote
jack on the back of the loudspeaker. Labeled "IR IN."
not work. Connect an IR remote repeater (optional, available from most audio/video specialty dealers) to the IR remote
jack on the back of the loudspeaker. Labeled "IR IN."
LEFT BASS
RIGHT BASS
LOW LEVEL
-
+
-
+
-
+
STEREO BASS
ON
OFF
MUTE
POWER
ON
OFF
L
R