MartinLogan Verse 业主指南
20
D
ISPLAY
[Anthem Room
Correction Status]
[Current Input
Custom Name]
[Volume Level]
[Current Input]
[Audio Codec Status]
OPTICAL 1
Fig. 10
Your soundbar displays the following information:
Audio Codec Status: If an audio signal with
surround sound encoding is detected this icon will
indicate Dolby
surround sound encoding is detected this icon will
indicate Dolby
®
Digital or DTS Digital Surround™
.
Volume Level: Displays the current volume level.
Current Input: This icon indicates the input that
is currently active using its standard input name.
This field is not customizable.
is currently active using its standard input name.
This field is not customizable.
Current Input Custom Name: This indicates
the input that is currently active using its custom
user defined name.
the input that is currently active using its custom
user defined name.
Anthem Room Correction Status: This icon
indicates that Anthem Room Correction is active. This
icon will not display if an Anthem Room Correction
has been manually turned off or an adjustment curve
has not been uploaded to the soundbar. For infor-
mation on setting up ARC, please refer to the
“(ARC™) Anthem Room Correction” section of this
manual.
indicates that Anthem Room Correction is active. This
icon will not display if an Anthem Room Correction
has been manually turned off or an adjustment curve
has not been uploaded to the soundbar. For infor-
mation on setting up ARC, please refer to the
“(ARC™) Anthem Room Correction” section of this
manual.
T
HE
M
ENU
S
YSTEM
ENTERING AND EXITING THE MENU
To access the menu from the remote, press ‘Menu’.
To exit the menu from the remote, press ‘Menu’
again. To access the menu from the control panel
press the menu button. To exit, press the menu but-
ton again. The menu auto exits after 30 seconds.
To access the menu from the remote, press ‘Menu’.
To exit the menu from the remote, press ‘Menu’
again. To access the menu from the control panel
press the menu button. To exit, press the menu but-
ton again. The menu auto exits after 30 seconds.
NAVIGATING THE MENU**
The menu is navigated using the ‘up/down/left/
right/enter’ navigation system. Up and Down are
used to cycle through the menu and submenu options.
Right or Enter/Select are used to access a sub-
menu or to select an option. With the remote, left is
used to exit a submenu and go back one level.
The menu is navigated using the ‘up/down/left/
right/enter’ navigation system. Up and Down are
used to cycle through the menu and submenu options.
Right or Enter/Select are used to access a sub-
menu or to select an option. With the remote, left is
used to exit a submenu and go back one level.