MartinLogan Verse 业主指南

32

Soundbar does not turn on.
•  Check that the soundbar’s AC power cord is 

firmly attached to the AC Power In input and 
plugged into a working AC outlet.

No output from the soundbar
•  Check that the soundbar is turned on.
•  Check that the soundbar is not muted.
•  Check that the soundbar’s volume is not turned 

all the way down.

•  Check that the soundbar is set to the proper input.
•  Check that all system components are turned 

on and source material is playing.

•  Turn the soundbar off and on using the remote 

control or the control power button.

•  Unplug the sound bar, wait 30 seconds, and 

plug it back in.

•  Check that all interconnecting cables are con-

nected at both ends.

•  If necessary, try connecting an alternate source 

component to make sure the original source 
component isn’t the problem.

No surround sound
•  Review the “Connection” section of this manual 

for a better understanding of recommended con-
nection methods and possible options that might 
impact the soundbar’s ability to receive multi-
channel encoded audio from your television and 
other audio/video source components.

Sound is coming from both my soundbar 
and my television
•  When utilizing the soundbar to reproduce 

audio, the television’s audio output should be 
defeated. Some televisions will allow you to 
turn off the internal speaker via the television’s 
menu system. Other televisions may require you 
to turn the television’s volume to “zero” or to 
“mute” the television.

The soundbar is too quiet even when 
the soundbar is turned up
•  Check that the output on your television or 

other source components are not connected via 
a variable level output. Sometimes this option 
may be configured in your source components 
menu. Please refer the manual for the source 
component in question.

Soundbar won’t learn remote codes from 
aftermarket remote
•  Review the “Menu Option: Learn” section of 

this manual.

•  Hold the remote 12 inches (30 cm) from the 

soundbar during the learning process.

•  Press the appropriate button on the second 

remote four times.

•  If the soundbar has already learned a remote 

code and you are attempting to program the 
same code to a second function the soundbar 
will respond with “Fail”.

•  There may be remote controls that the soundbar 

cannot learn or that the soundbar can not learn 
correctly. Due to the number of available remote 
controls, it is impossible to advise which will or 
will not work.

•  Check the user manual and/or manufacturer’s 

web-site for your aftermarket remote to see if 
MartinLogan is supported. If so, instead of 
‘learning’ with the soundbar, use the code 
provided by the manufacturer to program the 
aftermarket remote itself.

Soundbar remote won’t work
•  Replace the remote control’s batteries with 

matching batteries.

•  Make sure the batteries are installed in the 

proper orientation.

•  If new batteries do not fix the problem, you 

may have a faulty remote. Call MartinLogan 
customer service at 785-749-0133 for details.