MartinLogan Cadence 业主指南

19

CHANGING THE REMOTE’S BATTERY
The remote control for your speaker uses two AAA 
type batteries. Access the battery compartment by 
using a Phillips screwdriver to remove the screw lo-
cated on the bottom of the remote.

PROGRAMMING A SECOND REMOTE
This soundbar can be programmed to respond to a 
second remote. See “The Menu System” section of 
this manual for programming instructions.

Please note: There may be remote controls that the 
soundbar cannot learn or that the soundbar can 
not learn correctly. Due to the number of available 
remote controls, it is impossible to advise which 
will or will not work. 

Please note: When learning from a second remote, 
you will likely find it does not have buttons that directly 
correspond with all available soundbar commands. 
Not all soundbar commands have to be programmed. 
Some remote controls offer ‘function’ buttons (F1, F2, 
etc.) that can be used to program unique soundbar 
commands such as ‘NITE.MD’ or ‘OPTIC’.

Please note: Some remote controls offer discrete 
‘power on’ and ‘power off’ buttons. Some offer 
only a single button to toggle power on and off. 
The learning function of the soundbar allows you to 
program for either scenario.

Caution! Danger of explosion if bat-
tery is incorrectly replaced. Replace 
only with the same or equivalent type.