Kodak DC290 用户指南

11

Remove the batteries if the camera will not be used for an extended period of 
time. This will extend the battery life and prevent camera damage from battery 
leaks or corrosion. If the batteries are removed from the camera for more than a 
few days, the date and time will be deleted and must be reset.

When using batteries, limit the continuous operation of the color LCD for 
previewing pictures to less than 20 minutes. This is particularly true with Lithium 
batteries. Previewing pictures requires a significant electrical current, which over 
time could cause your batteries to heat up significantly. Should your camera 
become too hot inside, it is designed with protective circuitry to turn itself off. 
You should allow sufficient time for the camera to cool before turning it on again. 
Consider using an AC Adapter for KODAK DC200 Series Digital Cameras when 
using Preview mode for extended periods. Always follow your battery 
manufacturer directions fully. 

Open the battery door.

Slide the inside battery cover toward the back of 
the camera and then lift it away from the 
camera.

Insert the batteries as indicated on the battery 
cover. 

Close and lock the inside battery cover and 
battery door.