Asrock E350M1 90-MXGHU0-A0UAYZ 用户手册

14

2.3 Installation of Memory Modules (DIMM)

E350M1 motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM 

slots.

It is not allowed to install a DDR or DDR2 memory module into DDR3

slot; otherwise, this motherboard and DIMM may be damaged.

Installing a DIMM

Please make sure to disconnect power supply before adding or    

removing DIMMs or the system components.  

Step 1.  Unlock a DIMM slot by pressing the retaining clips outward. 

Step 2.  Align a DIMM on the slot such that the notch on the DIMM matches the   

 

break on the slot. 

 

 

The DIMM only fi ts in one correct orientation. It will cause permanent 

damage to the motherboard and the DIMM if you force the DIMM into 

the slot at incorrect orientation. 

Step 3.  Firmly insert the DIMM into the slot until the retaining clips at both ends   

 

fully snap back in place and the DIMM is properly seated.