Comp X Security Products Inc 421860 用户手册
It is possible to overload your motorcycle's charging
system by adding too many electrical accessories. If your
combined electrical accessories operating at any one time
consume more electrical current than your vehicle's
charging system can produce, the electrical consumption
can discharge the battery and cause vehicle electrical
system damage. See a Harley-Davidson dealer for advice
about the amount of current consumed by additional
electrical accessories, or for necessary wiring changes.
(00211b)
system by adding too many electrical accessories. If your
combined electrical accessories operating at any one time
consume more electrical current than your vehicle's
charging system can produce, the electrical consumption
can discharge the battery and cause vehicle electrical
system damage. See a Harley-Davidson dealer for advice
about the amount of current consumed by additional
electrical accessories, or for necessary wiring changes.
(00211b)
IMPORTANT MOVING INFORMATION
If you move from your present address, or sell your motorcycle,
please fill out and mail the post card at the back of this manual.
This is necessary in the event that the Company needs to
contact the owner concerning information that could affect the
safe operation of this motorcycle.
please fill out and mail the post card at the back of this manual.
This is necessary in the event that the Company needs to
contact the owner concerning information that could affect the
safe operation of this motorcycle.
CALIFORNIA EVAPORATIVE EMISSION
CONTROLS: 2008 MODELS
CONTROLS: 2008 MODELS
All new model year 2008 Harley-Davidson motorcycles sold in
the State of California are equipped with an evaporative emis-
the State of California are equipped with an evaporative emis-
sion control system. This system is designed to meet the CARB
regulations in effect at the time of manufacture.
regulations in effect at the time of manufacture.
The system requires a small amount of maintenance. Periodic
inspection is required to make sure hoses are properly routed,
not kinked or blocked and that all fittings are secure. Mounting
hardware should also be checked periodically for tightness.
inspection is required to make sure hoses are properly routed,
not kinked or blocked and that all fittings are secure. Mounting
hardware should also be checked periodically for tightness.
EPA NOISE REGULATIONS IN THE UNITED
STATES
STATES
EPA noise regulations require that the following statements be
included in the Owner's Manual.
included in the Owner's Manual.
TAMPERING WITH NOISE CONTROL SYSTEM PROHIB-
ITED: Federal law prohibits the following acts or the causing
thereof: (1) The removal or rendering inoperative by any person
other than for purposes of maintenance, repair, or replacement
of any device or element of design incorporated into any new
vehicle for the purpose of noise control prior to its sale or
delivery to the ultimate purchaser or while it is in use, or (2)
the use of the vehicle after such device or element of design
has been removed or rendered inoperative by any person.
ITED: Federal law prohibits the following acts or the causing
thereof: (1) The removal or rendering inoperative by any person
other than for purposes of maintenance, repair, or replacement
of any device or element of design incorporated into any new
vehicle for the purpose of noise control prior to its sale or
delivery to the ultimate purchaser or while it is in use, or (2)
the use of the vehicle after such device or element of design
has been removed or rendered inoperative by any person.
AMONG THOSE ACTS PRESUMED TO CONSTITUTE
TAMPERING ARE THE ACTS LISTED BELOW.
TAMPERING ARE THE ACTS LISTED BELOW.
1.
Replacing the muffler(s) and/or the entire exhaust system
with parts not certified to be noise legal for street use.
with parts not certified to be noise legal for street use.
208 Warranties and Responsibilities