ITian Corporation SQ201 用户手册

   

 

ྜ  DTIM Interval is a packet sent as a part of beacon. It alerts to a client 

device (PCs or Printers) from sleep mode (Power Save Mode).  DTIM 

packets are transmitted at an interval of DTIM interval multiplied by Beacon 

interval. (Example, If Beacon interval is 100 and DTIM Interval is 3, DTIM 

packets are transmitted every 100 * 3 = 300 ms) 

ྜྷ  Fragmentation threshold indicates maximum packet size before data gets 

fragmented into smaller but multiplied packets. This is used when large 

packets are fragmented into smaller packets according to network’s 

physical requirement. Values between 256 and 2346 bytes are used and 

the default value is 2346 bytes. 

ྞ RTS threshold is used for data flow control during wireless data 

communication by using RTS/CTS protocol. Square One sends Request to 

Send (RTS) frames to a particular receiving station and negotiates the 

sending of a data. After, Square One send an RTS, the wireless end device 

(Client Device) responds with a Clear to Send (CTS) frame to let Square 

One know when or how to begin data transmission. The range of RTS 

threshold is values between 0 to 2347 bytes and the default value is 2347 

bytes.