Shang Hai Ming Dai Electrics&appliance Co. Ltd MSGMHSG 用户手册
User Manual
1. Purpose
Ming Dai’s self ballast lamp has implemented three phosphors together into one
compact fluorescent. It is a new type of light resource of green environment. The
product’s applications are practical for supermarkets, shopping centers, retail
stores, and gymnasium.
compact fluorescent. It is a new type of light resource of green environment. The
product’s applications are practical for supermarkets, shopping centers, retail
stores, and gymnasium.
2. Characteristics
Ming Dai’s self ballast lamp provides instant start, long-life and high lumen output.
The lamp is designed to perform up to the industry standards by using less
electricity. Lamp can operate under -18 °C below zero degrees Celsius. From
Ming Dai’s testing results shows the self ballast lamp only uses 20% of the electricity
and it is compared and equivalent to a regular incandescent bulb.
The lamp is designed to perform up to the industry standards by using less
electricity. Lamp can operate under -18 °C below zero degrees Celsius. From
Ming Dai’s testing results shows the self ballast lamp only uses 20% of the electricity
and it is compared and equivalent to a regular incandescent bulb.
3. Directions
1) For Safety purposes, the lamp fixture must be powered off before being
installed, changed or being cleaned
2) This self ballast lamp cannot be operated with dimmer device. In order to keep
the lamp’s high performance it should be used in defined voltage.
3) This Lamp can be performed under environmental areas in temperature from
-18° C to 45° C, it cannot be used in enclosed fixture or wet areas.
4). Please check the power, voltage and contacts of the lamp incase the lamp
performs abnormal signs such as the light blinking or the light turns off
suddenly
5). Do not hold the tube by the hands while changing or cleaning the lamp.
performs abnormal signs such as the light blinking or the light turns off
suddenly
5). Do not hold the tube by the hands while changing or cleaning the lamp.
The proper way is to hold the lamp by the plastic housing.
4． Warnning：
This device complies with Part 18 of the FCC Rules.
This product may cause interference to radio equipment and should not be
installed near maritime safety communications equipment or other critical
navigation or communication equipment operating between 0.45–30 MHz. If
this occurs, please change outlet or move the lamp far away from other
appliance.
installed near maritime safety communications equipment or other critical
navigation or communication equipment operating between 0.45–30 MHz. If
this occurs, please change outlet or move the lamp far away from other
appliance.
Shang Hai Ming Dai Electrics & Appliance Co., Ltd.
2481jiatang Road, Jiading District,Shanghai, China