KONG YUE ELECTRONICS & INFORMATION INDUSTRY LTD. GSX-190II 用户手册
GSX-190II User's Manual
- 13 -
Chapter 2 Control Panel
You can use the four keys on the control panel to operate your printer, such as line feed, form feed,
load paper, eject paper or set print speed. The indicator lights on the control panel show the current
print speed.
load paper, eject paper or set print speed. The indicator lights on the control panel show the current
print speed.
2.1 Indicator Light
2.2 Key Functions
2.2.1 In the Tractor Paper Mode
TEAR
1. In the offline mode, if the paper is at the print position, press TEAR key once and the printer feeds
paper to the tear off position.
2. In the offline mode, if the paper is at the tear off position, press TEAR key once and the printer ejects
paper to the next page or the printing home position of the current page.
LF/FF
In the offline mode, if the paper is at the print position, press the LF/FF key once (less than 0.5 second),
the printer will feed the paper one line base on current line spacing. Alternatively, hold the LF/FF key
down, the printer will load tractor paper one page continuously.
the printer will feed the paper one line base on current line spacing. Alternatively, hold the LF/FF key
down, the printer will load tractor paper one page continuously.
EJECT/LOAD
1. When the paper is at the ready position, press EJECT/LOAD key once, the paper will be fed into the
printing home position automatically.
2. When the paper is at the printing home position, press EJECT/LOAD key in the offline mode, the
paper will return the ready position.
3. When the paper is at the general print position (not the printing home position), press EJECT/LOAD
key once in offline mode less than 0.5 seconds, the paper is ejected one line. Alternatively, hold the
EJECT/LOAD key down, the printer will eject one page when the ejectable length is longer than one
page. If the paper ejectable length is less than one page, the paper will go back to the ready position.
EJECT/LOAD key down, the printer will eject one page when the ejectable length is longer than one
page. If the paper ejectable length is less than one page, the paper will go back to the ready position.
4. When the paper is at the tear off position, press EJECT/LOAD key once, the printer will eject the
one page automatically.
ONLINE
1. If the printer has loaded paper in the offline mode, press the key to enter ONLINE mode, the
ONLINE indicator is on and the printer available to print now.
Press this key in the online mode, the printer is offline, ONLINE indicator is off and the printer is
unavailable to print.
unavailable to print.
Indicator
OFF
ON
BLINK
ONLINE (Green)
Offline
Online
Micro-Adjust
POWER (Red)
Turn off
Turn on
Paper out or malfunction occurs
Indicator 1, 2
Indicate the current printing speed
Figure 2-1 Control panel