KONG YUE ELECTRONICS & INFORMATION INDUSTRY LTD. GSX-190II 用户手册

 

- 25 - 

This section describes all the settings available in the Menu Setup Mode. 

SYSTEM SETUP 
EMULATION 

Specify printer's control commands. 

LANGUAGE 

Specify the printer menu language as English or Chinese.   

CHAR. MODE 

Select ASCII or Chinese character mode to print when printer receives character 
printing task. 

FONT 

Specify a kind of ASCII fonts to print when printer receives character printing 
task. If the print data with font instruction, printer gives priority to print data 
instruction. (Only valid when CHARACTER MODE is choosing ASCII) 

ENG PITCH 

Specify the ASCII character spacing in characters per inch (cpi). 

CHI PITCH 

Specify the Chinese character spacing in characters per inch (cpi). 

INTL CHAR SET 

Specify the printer internal character set according to different using 
circumstances of international characters. 

CHARACTER SET 

Specify character set as Italic Character or Graphic Character. 

IBM CHAR TBL 

Select IBM character table 1, which the position from 80H to 90H of character 
table are control codes. 

CODE PAGE 

Select the code page according to different national characters use 
circumstances. 

PAGE LAYOUT   

LINE SPACING 

Specify the line spacing in lines per inch (lpi). If the print data with vertical pitch 
instruction, printer would give priority to print data instruction. 

FORM LENGTH 

Specify the page length of the form, for both cut sheet and continuous paper. 
Printer feeds to next page according to the specified page length. If the print data 
with page length instruction, printer would give priority to print data instruction.   

FORM LOCK 

After selecting this function on, printer would lock the page length setting. Printer 
feeds to next page according to the current setting parameter and would not 
affected by the page length instruction of the print data. 

PAGE SKIP 

After selecting this function on, printer would leave one inch (25.4mm) margin at 
the perforation of the tractor paper automatically. If the print data with page 
margin instruction, printer would give priority to print data instruction. 

COMPRESS 
PRINT 

After selecting this function on, printer would print out transverse compressed 
content according to the specified percentage in normal speed. When 
auto-compress mode is selected, printer would detect paper width automatically 
and choose the proper percentage to print. 

PRINT SETUP 

PRINT DIR 

Select the printing direction of the print head: unidirectional, bidirectional or 
selected via software. 

PRT-SPEED 

Specify the print speed of printer. Printing resolution is lower while print speed is 
higher.  

AUTO LF 

If this function is on, printer would advance the paper one line automatically after 
receiving every carriage return instruction. 

TEAR OFF 

Select the function of feeding the paper to tear off position ON or OFF in tractor 
paper mode. After selecting this function on, if the printer receives FF command 
for a period of time, but receives no printing data, printer would feed the page 
bottom to tear off position automatically.