Rommelsbacher CT 2215/IN 用户手册

23

Details on the temperature levels:

The values indicated are reference values and apply to standard steel pots featuring a diameter 
of 20 cm. 

level 1 

 60 °C 

level 12  

170 °C

level 2  

70 °C 

level 13    

  180 °C

level 3  

80 °C 

level 14  

190 °C

level 4   

90 °C 

level 15  

200 °C

level 5  

100 °C 

level 16  

210 °C

level 6  

110 °C 

level 17  

220 °C

level 7  

120 °C 

level 18  

230 °C

level 8  

130 °C 

level 19  

240 °C

level 9  

140 °C 

level 20  

250 °C

level 10 

150 °C 

level 21 

260 °C

level 11 

160 °C

NOTE: The temperature at the bottom of the cookware is checked by a sensor in the centre of 
the cooking zone. The regulation will only function properly if the cookware covers this area. 
The cookware should have a fl at and not too thick bottom to ensure a good heat transfer. The 
maximum tolerable temperature for the “temperature level” mode is 260 °C. 

You may change at any time from the “power level” mode to the “temperature level” mode and 
vice versa. The last selected setting of the respective function is saved. 

•  Changeover from “power level” mode to “temperature level” mode. 

During operation in the “power level” mode touch the “temp” sensor “+” or “-“ (3) for chan-
ging to the “temperature level” mode. The display (7c) goes out, the power level used before 
is saved and the “temp” display (7b) gets activated. 
Now you are working in the “temperature level” mode and can adjust the settings according 
to your requirements.

NOTE:  When changing over from the „power level“ mode to the „temperature level“ mode, the 
temperature is 
increased by one level when touching the “+” sensor (3),
reduced by one level when touching the ”-“ sensor (3).

•  Changeover from “temperature level” mode to “power level” mode. 

During operation in the “temperature level” mode touch the “power” sensor “+” or “-“ (2) for 
changing to the “power level” mode. The display (7b) goes out, the temperature level used 
before is saved and the “power” display (7c) gets activated. 
Now you are working in the “power level” mode and can adjust the settings according to your 
requirements.

NOTE:  When changing over from the „temperature level“ mode to the „power level“ mode, the 
power levels get
increased by one when touching the “+” sensor (2),
reduced by one when touching the ”-“ sensor (2).

The “booster” mode is suitable for searing larger quantities of food, for quick-start cooking or 
boiling of water. The “booster” mode can be activated in both “power level” and “temperature 
level” mode. The activated “booster” mode generates an increased power output up to 2200 W 
for a certain period of time.