VeriWave Inc. A001Y10 用户手册

 

 

Page 15 of 26 

 

The WaveDeploy hardware requires the WaveDeploy Pro application for use.  If you do not 
already have this WaveDeploy Pro application and/or you do not have a license for this version 
of the application then it will be necessary to contact your sales person to purchase this software. 
 
If you already have the WaveDeploy application installed, but you are not sure which version of 
WaveDeploy you have then start the application.  This can be accomplished using the Start menu 
by navigating to Start->VeriWave->WaveDeploy.  Once the application starts, open the Help-
>About menu item and note the application name.  If the application name is WaveDeploy Pro 
then you should proceed to the Hardware Configuration section of these instructions. 
 
To install WaveDeploy Pro, it is necessary to download the application and to fulfill a license.  
To download the application, open your web browser and type the address 
www.wavedeploy.com into the address bar.  Once on the web page, click on the “Download 
Now” button.  Once the file has been transferred to your computer, run the setup.exe program to 
install WaveDeploy Basic. 
 
To upgrade the WaveDeploy application to WaveDeploy Pro, it is necessary to install a license.  
You should have already received an e-mail containing a license authorization code if you have 
purchased WaveDeploy Pro or WaveDeploy Expert.  If you do not have this code then please 
contact your salesperson or the VeriWave Technical Assistance Center for support.  Once you 
have the license code, start the WaveDeploy Basic application and open the Tools->Licensing 
menu item.  In the dialog box, enter the license authorization code from the e-mail into the text 
box in the “Obtain My License” section.  Finally, click on the Fulfill button.  In less than one 
minute the license is installed on your computer, upgrading you to the WaveDeploy Pro / Expert 
level. 
 

Note that the license code can be lengthy, so it is often easier to simply highlight the code 

in the e-mail, hit the Ctrl-C key combination to copy the authorization code, switch to the 

WaveDeploy application and click in the Authorization Code text box and hit the Ctrl-V 

key combination to paste the code into WaveDeploy. 
 

Use of shielded Ethernet and USB cables such as outlined in Table 1 or Table 2 must be 
used with all WaveDeploy WF1101 and EF1101 devices. 
 

Start the WaveDeploy Pro application.  Connect a USB cable from this computer to the 
WaveDeploy hardware. 
 
Power the WaveDeploy hardware using the associated power supply and cables.  The 
WaveDeploy hardware has no on or off button, so simply plugging in the power supply is all that