VeriWave Inc. A001Y10 用户手册
VeriWave, Inc. WaveDeploy WiFi(WF1101)/Ethernet(EF1101) Users Guide
Page 21 of 26
1. The FER shall be less than 8x10
-2
at a PSDU length of 1024 octets for an input
level as defined above. The minimum input levels are measured at the antenna
connector.
2. The packet error rate (PER) shall be less than 10% for a PSDU length of 4096
octets for rate-dependent input levels as above specified or less. The minimum
input levels are measured at the antenna connector.
connector.
2. The packet error rate (PER) shall be less than 10% for a PSDU length of 4096
octets for rate-dependent input levels as above specified or less. The minimum
input levels are measured at the antenna connector.
6.1.11
WaveDeploy WiFi WF1101 RX Maximum Input
0 dBm.
Caution: Exceeding this limit can cause damage to sensitive RF electronic
Caution: Exceeding this limit can cause damage to sensitive RF electronic
circuitry.
6.1.12
WaveDeploy WiFi WF1101 ESD Protection, RF Input
Model
Rating
Unit
Threshold Volt.
HBM
2000
V
CDM
500
V
6.2 WaveDeploy Ethernet Functional Characteristics
6.2.1 WaveDeploy Ethernet EF1101 Number of Clients, Flows and Capture Buffer Size
Characteristic
Typical
Number of Supported Clients
256
Number of supported Flows
1000
Capture Buffer Size (Mbytes)
256