em-trak Marine Electronics Ltd 405-0026 用户手册
Operation
Page 28
Table 3
Status history message descriptions
3.17.6 Diagnostics
Certain diagnostics information is provided to assist with installation and maintenance of the transceiver. This
can be accessed via the Maintenance menu. Figure 30 shows the diagnostics menu page. A number of
features can be accessed via the diagnostics menu:
can be accessed via the Maintenance menu. Figure 30 shows the diagnostics menu page. A number of
features can be accessed via the diagnostics menu:
● Internal GPS status provides GPS lock status, number of satellites in view and in use and the mode of
use.
● ADC and VSWR data provides internal system information for use in installation and maintenance
only
● Sensor port status provides details of sensor port settings.
Text message
Description
AIS: UTC clock lost
The internal GNSS receiver is not providing
timing information to the AIS. Position reports
will continue to be made.
timing information to the AIS. Position reports
will continue to be made.
AIS: external DGNSS in use
An externally connected differential GNSS is
being used as AIS position source.
being used as AIS position source.
AIS: external GNSS in use
An externally connected GNSS is being used
as AIS position source.
as AIS position source.
AIS: internal DGNSS in use (beacon)
The internal GNSS, corrected by data from a
connected beacon recevier is being used as
AIS position source.
connected beacon recevier is being used as
AIS position source.
AIS: internal DGNSS in use (message 17)
The internal GNSS, corrected by data from an
AIS base station is being used as AIS position
source.
AIS base station is being used as AIS position
source.
AIS: internal GNSS in use
The internal GNSS is being used as AIS
position source.
position source.
AIS: external SOG/COG in use
An external source of SOG / COG data is
being used as source of speed and course
data.
being used as source of speed and course
data.
AIS: internal SOG/COG in use
Internal GNSS SOG / COG data is being used
as source of speed and course data.
as source of speed and course data.
AIS: Heading valid
The connected source of heading data is valid.
AIS: Rate of Turn Indicator in use
The connected ROT sensor data is valid
AIS: Other ROT source in use
Rate of turn information is based on Heading
data.
data.
AIS: Channel management parameters
changed
changed
The AIS has received commands to use
alternate reporting channels (from an AIS base
station)
alternate reporting channels (from an AIS base
station)