Zonoff Inc. EMBY001 用户手册
85
84
ADVANCED FEATURES
cont’d
2. Go to TaHomA’s Event Configurator and check the “Enable Home Occupancy” box in the upper right hand corner. All
motion sensors that have been included into TaHomA will now act as triggers for “TaHomA Home” and “TaHomA Away”
Scenes.
Scenes.
Advanced Tools Review
On the upper right hand side of the Device Configurator is the “Advanced Tools” button. Click this button to enter the Advanced
Tools menu. Somfy recommends running the “Rediscover Z-Wave Network” process after all devices have been added to the
system. The other features available are used for Somfy technical support.
Tools menu. Somfy recommends running the “Rediscover Z-Wave Network” process after all devices have been added to the
system. The other features available are used for Somfy technical support.
Run this after all devices
have been successfully
included into TaHomA.
have been successfully
included into TaHomA.
Other features for use with
Somfy technical support.
Somfy technical support.
Device Tools Review
Click on the Device Tools button below the Device Editor window to access the Device Tools menu. In the Device Tools menu, you will
find the following options:
find the following options:
Device Setup: Run the Device Setup Wizard. The
Device Setup Wizard initiates a process which collects
device data for optimal system performance.
Device Setup Wizard initiates a process which collects
device data for optimal system performance.
Rediscover Device: Run
rediscover network on device.
rediscover network on device.
Replace Failed: Runs
command to replace the
failed device.
command to replace the
failed device.
Z-Wave Cancel: Cancels the current
Z-Wave command running on the
TaHomA controller
Z-Wave command running on the
TaHomA controller
Remove Failed: Runs
command to remove
the failed device
command to remove
the failed device
Device Configurator Icons
There are 4 buttons in the upper right hand corner of the Device Configurator:
Refresh button: Refreshes devices.
Remove Devices button: Initiate device removal.
Icon View button: Displays icon view.
Detailed View: Displays detailed view with specific device information. Typically used for Somfy technical support.
The Device Configurator is
where you add or remove
devices to or from the
TaHomA system.
where you add or remove
devices to or from the
TaHomA system.
ADVANCED FEATURES
cont’d
Use this command to join TaHomA to another Z-Wave system or
TaHomA system. Clicking “Learn Network” will enable TaHomA
to join an existing Z-Wave network as a secondary or inclusion
controller. Once successfully included, all devices in the existing
network will show up in TaHomA’s Device Configurator.
TaHomA system. Clicking “Learn Network” will enable TaHomA
to join an existing Z-Wave network as a secondary or inclusion
controller. Once successfully included, all devices in the existing
network will show up in TaHomA’s Device Configurator.
The Controller Status Messages
window displays system information
when processes are running.
window displays system information
when processes are running.