Texas Instruments 2531USB 用户手册
SWRA276A
March 2013
CC2531 USB Evaluation Kit Quick Start Guide
1. Kit Contents
1 x CC2531 USB Dongle
Documentation
The RF boards in this kit are FCC and IC
certified and tested to comply with
ETSI/R&TTE over temperature from 0 to
+35°C.
Caution! The kit contains
ESD sensitive components.
Handle with care to prevent
permanent damage.
2. Getting Started
The CC2531 USB Dongle can be used as
a development platform for USB and RF
applications.
An external development tool, like the CC
Debugger, is required to program and
debug software running on the CC2531.
The
CC2531
Dongle
comes
preprogrammed with software that lets the
dongle operate as a packet capture device
for the SmartRF Packet Sniffer.
This Quick Start Guide will describe how
to use the dongle with the packet sniffer
and the next steps for your own software
development.
dongle operate as a packet capture device
for the SmartRF Packet Sniffer.
This Quick Start Guide will describe how
to use the dongle with the packet sniffer
and the next steps for your own software
development.
3. Install the driver
Before plugging the dongle into the PC,
please install TI’s SmartRF Packet Sniffer.
When installing the Packet Sniffer, you will
also automatically install the USB driver
required
for
proper
communication
between the dongle and the packet sniffer.
4. Insert the USB dongle
When inserting the USB dongle into a
USB slot, Windows’ new hardware wizard
will appear. Select the options for
automatic installation and wait for the
driver installation to complete. After
installation, the Packet Sniffer is ready for
use.
Caution! This USB dongle has been
designed to be powered from a USB port.
Do not attempt to connect other power
sources to the device. Avoid powering the
unit when not in use.
designed to be powered from a USB port.
Do not attempt to connect other power
sources to the device. Avoid powering the
unit when not in use.
5. Packet Sniffer
TI’s SmartRF Packet Sniffer is a
convenient tool for debugging of RF
protocols. It displays the captured packets
and
decodes
the
packet
contents
depending on what protocol you are
running.
running.
When starting the packet sniffer, select the
protocol as required. The Packet Sniffer
for CC2531 supports SimpliciTI, RemoTI
and ZigBee PRO, in addition to a generic
mode (no packet parsing).
6. Debugging and Programming
For software development on the CC2531
an external debugger is necessary. This
can be either a SmartRF05EB [3] as
shown in the first picture,
…
or a CC Debugger [4] as shown in the
second picture.