Philips SDV1225T SDV1225T/27 用户手册

8

 

Tip

For best reception, point the antenna in the 

 

•

direction of the transmitter.

Set up a digital tuner with this 

antenna

You can install available channels with the digital 

TV tuner. This automatic process is part of the 

setup of the tuner. Ensure the antenna has 

set up properly before the tuner can receive 

viewable channels.
There are two ways to connect the antenna to 

the TV:

Connect the antenna to a digital tuner. 

•

If the signal strength is good enough, the 

channels can be memorized in the tuner 

automatically .
Connect the antenna directly to the TV. 

•

Tune to the analogue channels and find

the best antenna location. Then re-

connect the antenna to the digital tuner. 

Ensure the signal strength is good enough 

before you install the channels with the 

tuner.

-or-

4  Set up 

SDV1225T/27

For VHF reception

1

  Extend the telescopic dipoles to the 

longest possible length.

  

2

  Turn the TV to the desired channel. Move 

the dipoles in different directions up and 

down until the reception is achieved.

 

For UHF reception

1

  Turn the TV to the desired channel. 

Point the UHF reflector towards the

transmitter until reception is achieved.

EN