Graupner GmbH & Co. KG MC-20 用户手册
144 Detail program description - Phase settings | Winged models
Example:
Phase 1
Phase 2
Phase 3
Phase 4
Phase 5
Name
Timer
Sw. time
Motor
0.1s
yes
0.1s
yes
1.1s
yes
0.1s
yes
0.1s
–
–
–
–
¾
Normal
Launch
Dist.
yes
The switchover time from any other phase to Phase 1
«normal» will take 2.2 s.
«normal» will take 2.2 s.
The time for a switchover from, for example, Phase 1
to Phase 3, is set to 1.1 s and the time for a switchover
from Phase 1 or 3 to Phase 2 "Launch" is 1.5 s.
to Phase 3, is set to 1.1 s and the time for a switchover
from Phase 1 or 3 to Phase 2 "Launch" is 1.5 s.
Such asymmetric transition times can be useful when,
e.g. switching between extremely different fl ight
phases, such as between aerobatics and normal fl ight.
A simultaneous tap on the
e.g. switching between extremely different fl ight
phases, such as between aerobatics and normal fl ight.
A simultaneous tap on the
cd or ef keys of the
right touch pad (CLEAR) will reset the time in the
currently active value fi eld back to 0.1.
currently active value fi eld back to 0.1.
Note:
The "switch time" set here applies uniformly to all
settings that are specifi c to fl ight phases, and thus
to all mixers activated in the »Wing mixers« menu,
see page 160. Accordingly, the transition between
fl ight phase-specifi c mixers does not occur abruptly.
However, if individual servos are to be switched
without a delay then these can be defi ned accordingly
in the »Non-delayed chan« menu (see page 151).
The "switch time" set here applies uniformly to all
settings that are specifi c to fl ight phases, and thus
to all mixers activated in the »Wing mixers« menu,
see page 160. Accordingly, the transition between
fl ight phase-specifi c mixers does not occur abruptly.
However, if individual servos are to be switched
without a delay then these can be defi ned accordingly
in the »Non-delayed chan« menu (see page 151).