Graupner GmbH & Co. KG MC-20 用户手册

29

Entry keys ESC and SET

Display symbols

  the active model memory has not yet been 

"bound" to a HoTT receiver. More about the 
"Binding" process can be found on page 77 
and 85.

  Switched off on RF transmitter side

blinking antenna symbol: 
The last receiver bound to the active model is 
inactive or out of range

M

 x 

no telemetry signal to receive

M

signal strength indicator of the connection to 
the model

P

  signal strength indicator of the connection to the 

pupil transmitter in the display of the teacher 
transmitter for wireless teacher/pupil operation

•  

key 

each brief tap on the 

 key will cause a 

stepwise return in function selection or even 
further to the base screen. Any changes made to 
settings remain.
Momentarily touching the 

 key for about 1 s 

while in the base screen will open and close the 
Telemetry menu.
Selection keys 

•

ef cd

A tap on one of these keys will scroll, 

1. 

appropriate for the given arrow direction, 
through lists, such as through the model 
selection list or the multi-function list or within 
menus though the menu's lines. 
A brief simultaneous tap on the 

2. 

ef keys will 

cause a switch from the transmitters base 
screen, as well as from almost any menu 
position, into the »Servo display« menu.

•

 key

After switching the transmitter on, a brief tap 

1. 

on the 

 key will cause a jump from the 

displayed base screen to the Multi-function 
menu. In the same manner, a selected menu 
can now be called up with the 

 key. 

Within menus having settings, activate / 

2. 

deactivate (confi rm) the given setting fi elds with 
a tap on the 

 key.

Selection keys 

•

ef cd

1. "Scrolling" through the Multi-function menu 

and menu lines within the Basic Settings menu 
analogous to the selection keys of the left touch 
pad or by "circling" over the four selection keys.

2. Select or set parameters in setting fi elds after 

their activation with a tap on the 

 key, 

whereby the 

fc and ed keys will have the 

same given function. In this case it is completely 
irrelevant which of these two keys are used.
A brief simultaneous tap on the 

3. 

cd or ef keys 

will set a changed parameter value in the entry 
fi eld back to its default value (CLEAR).