Graupner GmbH & Co. KG MC-20 用户手册
45
Commissioning the transmitter
be the "COM 3" port.
Now call up menu option "Firmware Upgrade"
from "Menu" or open the "Controller Menu" and
click on "Firmware Upgrade".
Now call up menu option "Firmware Upgrade"
from "Menu" or open the "Controller Menu" and
click on "Firmware Upgrade".
Click on the button labeled "File Browse" and
select the desired fi rmware update fi le with a ".bin"
fi lename extension from the "Open fi le" window.
Firmware fi les are product-specifi cally coded,
i.e. if you should accidentally select a fi le which
does not correspond to the product (e.g. receiver
update fi le instead of a transmitter update fi le), the
"Product code error" popup window will appear
and the block the update process from starting.
Now switch on the transmitter then start the
transmitter update by clicking on the "Download
Start" button.
After a brief period a warning will appear stating
that the transmitter's RF transmission will now be
interrupted and that, because of this, any receiver
system currently in operation should be switched
off. Switch off your receiver system if it is switched
on then click on "Yes".
select the desired fi rmware update fi le with a ".bin"
fi lename extension from the "Open fi le" window.
Firmware fi les are product-specifi cally coded,
i.e. if you should accidentally select a fi le which
does not correspond to the product (e.g. receiver
update fi le instead of a transmitter update fi le), the
"Product code error" popup window will appear
and the block the update process from starting.
Now switch on the transmitter then start the
transmitter update by clicking on the "Download
Start" button.
After a brief period a warning will appear stating
that the transmitter's RF transmission will now be
interrupted and that, because of this, any receiver
system currently in operation should be switched
off. Switch off your receiver system if it is switched
on then click on "Yes".
This will start the actual update process. A progress
bar will begin to operate above a sequence of
running text lines.
bar will begin to operate above a sequence of
running text lines.
Do not terminate the update process before the
progress bar has reached its right end and the
"Firmware Download Success" message appears.
progress bar has reached its right end and the
"Firmware Download Success" message appears.
Click on "OK". Subsequently switch off the
transmitter and disconnect the USB cable
between the transmitter and the PC or Laptop.
If the progress bar hangs up without showing any
further progress, close the program and repeat
the update process. Be sure to watch for any error
messages that may appear.
transmitter and disconnect the USB cable
between the transmitter and the PC or Laptop.
If the progress bar hangs up without showing any
further progress, close the program and repeat
the update process. Be sure to watch for any error
messages that may appear.