Vihaan Networks Ltd. RBTS850R2 用户手册
B S S
C
O N F I G U R A T I O N A N D
U
S E R
G
U I D E
© VNL
®
2010-2011, All rights reserved
Commercial in Confidence
Page 53
LNote:
You can perform only add or delete functions on
AInterface table and can add maximum one row for A-
Interface.
5.1.2 Configuring TrunkGroup
Trunk group is the collection of trunks/lines that carry
incoming and outgoing traffic in order to establish
connection between switching systems.
This section describes how you can configure TrunkGroup.
5.1.2.1 Adding TrunkGroup
The TrunkGroup automatically adds in the AIF ME when you
add AInterface.
LNote:
All fields of the TrunkGroup ME are read-only.
5.1.2.2 Adding AIFTrunk
You should add AIFTrunk to configure circuit identity code
(CIC) card on an AInterface trunkport. CIC is used to identify
the trunk circuit to be connected.
You cannot modify the fields of AIFTrunk. AIFTrunk lists all
CIC card with the timeslot and CIC id.
Follow these steps to add AIFTrunk configuration:
1. Open the BSS node in the modify mode.
2. Expand StackConfig, expand SS7 Stack, expand AIF,
click AInterface: <IP address>, click TrunkGroup, right-
click TrunkGroup :<IP address>, and click Add
Element
.
The Add Element dialog box appears.
3.
Select the ME Type as AIFTrunk and click Ok.