Reconyx Inc. HF-TRX 用户手册
17
©RECONYX, Inc.
Programming Professional Series Camera Traps
All of the settings detailed above are available on your Professional Series
Camera Trap. In addition, there are many more set-up options available for
Professional Series cameras by using the Configuration Software.
The Configuration Software saves your specified settings to the memory
card. When you insert the memory card into the camera and then power it
ON, the camera will automatically program itself with your specified settings.
The camera will display “SAVED CONFIG” after the settings have been
successfully saved. The file is then erased from the card and is ready to
operate with the new settings.
NOTE: The camera will remember these settings even when shut off, so you
Camera Trap. In addition, there are many more set-up options available for
Professional Series cameras by using the Configuration Software.
The Configuration Software saves your specified settings to the memory
card. When you insert the memory card into the camera and then power it
ON, the camera will automatically program itself with your specified settings.
The camera will display “SAVED CONFIG” after the settings have been
successfully saved. The file is then erased from the card and is ready to
operate with the new settings.
NOTE: The camera will remember these settings even when shut off, so you
do not need to reconfigure the camera unless you want to change its
behavior.
behavior.
If you have configured your camera from your PC and you go into the
Change Setup option using the camera’s menu, it will prompt you with
“USING CONFIG” – your options will be <GO BACK> or <CONTINUE>. If
you continue, the settings previously set from the CONFIG software will be
overwritten with the settings you select on the camera.
NOTE: Your new MapView™ software is fully compatible with older
Change Setup option using the camera’s menu, it will prompt you with
“USING CONFIG” – your options will be <GO BACK> or <CONTINUE>. If
you continue, the settings previously set from the CONFIG software will be
overwritten with the settings you select on the camera.
NOTE: Your new MapView™ software is fully compatible with older
RECONYX™ RapidFire™ Professional and Silent Image series
cameras.
cameras.
You can program old and new cameras as well as import, view, tag, and
export image data from all RECONYX™ brand cameras.
export image data from all RECONYX™ brand cameras.
TIP
:
Setting the date and time on the new HyperFire
™
Professional
cameras is easier to do right on the camera than it is through the
Configuration software.
Configuration software.