Reconyx Inc. HF-TRX 用户手册
23
©RECONYX, Inc.
Additional Camera Options
IR Mask
If you need to clean the IR Array window, the IR Mask™ is easily removed
by carefully inserting a small screw driver in the left or right side to pry it out.
by carefully inserting a small screw driver in the left or right side to pry it out.
Warning: Be very careful not to scratch the IR Array window!
Step 1
Step 2
Step 3
The windows covering the IR Array, lens, walktest indicator and light meter,
may all be cleaned with glass cleaner or water using a soft non-abrasive
cloth.
To replace the IR Mask™, carefully line up one side of the IR Mask™ with
the IR Array window. Then gently push on both sides until the IR Mask™ is
completely seated against the window, and snaps into both sides.
may all be cleaned with glass cleaner or water using a soft non-abrasive
cloth.
To replace the IR Mask™, carefully line up one side of the IR Mask™ with
the IR Array window. Then gently push on both sides until the IR Mask™ is
completely seated against the window, and snaps into both sides.
Step 1
Step 2
Step 3