Shenzhen Hi-FiD Electronics Co. Ltd. HFD Test Setup Photos
Hi-FiD
Bluetooth Mini Speaker User Manual
Thank you for your purchase of this product. Please read this manual carefully to
maximise your enjoyment of the product and to ensure your own safety.
Warning:
1. To prevent any fires or electrical hazards, do not disassemble or replace any parts of
the unit. Please contact professional maintenance or qualified service center if there is
any damage to the unit.
2. Keep all liquids, fire, candles, dust, and other objects away from speaker. Do not
expose the speaker to rain, wet areas, heat, or vibration.
3. Always place the speaker on a level surface when in use. Avoid excessive force when
pressing the buttons.
4. If cleaning is required, use a dry soft or damp cloth without corrosive solvent to gently
clean area.
How to use:
Multi Function
- When operating, keep the power switch in the “ON” position before
choosing a music mode. Short press “M”
button to find “Micro SD” “AUX IN” “FM
Radio” in a circular pattern.
(It will skip micro SD mode automatically if there is no micro SD inserted in the unit.)
Micro SD
- Insert a micro SD card and short press “M”
button to select the micro SD
function. The indicator light will slowly flash green after selecting this mode. Long press
“
+/-
” button for volume Up/Down, short press “
+/-
” button for NEXT/ PREV. Short press
“Play/Pause” button for PLAY/PAUSE.
AUX IN
- Short press “M” button to choose AUX IN mode, the indicator light will show a
solid green non-flashing light. Long press “
+/-
” button for volume Up/Down. Short press
“Play/Pause” button for PLAY/ PAUSE.
FM Radio
- Insert FM rod antenna and short press “M” button to select the FM mode. The
indicator light shows the green slow flash. Short press “Play/Pause” button to search
channels, channels will be stored automatically. Long press “
+/-
” button for volume Up/
Down. Short press “
+/-
” button for NEXT/ PREV Channel.
Bluetooth Mode
–
When the speaker is turned on, it will automatically be in “Bluetooth”
mode. Bluetooth will automatically open in 3 seconds followed by blue and red alternating
lights. At this time connect your bluetooth devices and pair them with the speaker. You can
only switch to other modes on the speaker once the audio from your bluetooth device is
paused. During this time Bluetooth link will remain connected and a blue light will slowly
flash. When playing your music from your Bluetooth device, “bluetooth” function is always