Richen Industrial Co. Ltd BTS35 用户手册
BTS-32 BM3251_AUX In_20140729 V1.0
4
B. About the rechargeable Battery & Charging
1. Regarding the lithium rechargeable battery
This Bluetooth Speaker has an internal, non–user-replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it
charge for about 4 ~ 6 hours or until the “Charge LED (11)” Indicator
light from On to off which show you the battery is fully charged.
charge for about 4 ~ 6 hours or until the “Charge LED (11)” Indicator
light from On to off which show you the battery is fully charged.
For maintain the battery life and performance, if speaker isn’t used
for a while, the battery might need to be recharged. Charge the
battery at least once every month.
battery at least once every month.
2. To recharge the built-in battery:
Connect the Bluetooth Speaker’s “Micro USB socket (5)” with the
Computer’s USB port through USB cable.
The “Charge LED (11)” Indicator will turn On in red, the battery is in
charging.
The “Charge LED (11)” Indicator will turn Off when the rechargeable
battery is fully charged.
Disconnect the USB cable when it is done.
C. Power ON and Pairing
1. Press and hold the “ (3)” button to turn On the device. A series of
tones will sound, followed by voice announce “It is pairing waiting
for device connecting” from speakers. And the “Bluetooth LED (2)”
indicator is fast blinking in Blue.
for device connecting” from speakers. And the “Bluetooth LED (2)”
indicator is fast blinking in Blue.
2. Then, activate the Bluetooth function in your Bluetooth device (such
as Mobile Phone or Personal Computer); the device will enter to
Bluetooth searching mode automatically, if not, tap the relate
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
Bluetooth searching mode automatically, if not, tap the relate
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
3. Your Bluetooth device should show
“HOMEANDGO”
in list, and then
select it for pairing. Waiting for some seconds and you will see
connected message as shown on your mobile device. (For some
Bluetooth devices, you may need to input “0000” as pairing
password)
connected message as shown on your mobile device. (For some
Bluetooth devices, you may need to input “0000” as pairing
password)
4. If pairing is successful, voices announce “paired” from speakers, and
the “Bluetooth LED (2)” indicator will slow blinking each 3 seconds
once.
once.
5. Now, you can start to music play from the mobile device by it music
player program.
6. Press and hold the “ (3)” button to turn Off the device when it is
not in use.