RDI Technology Co. Ltd. CA610 用户手册

Connect the camera

CMD6129 Quick Start

Connect the camera to a power outlet with supplied power adapter for the camera, the power supply jack

is in the rear of the camera base. Then set the slide switch in the left side to ‘on’ position, the camera is

now switched on, and meanwhile the light below the dip switch is also on.

Sound Input: Below the camera lens there is a built-in microphone to input the sound which can be

outputted in the monitor (Figure 1).

Night Light: In the top of the camera is a night light button, users can press it to switch on the light for

the use in dark (Figure 1).

Figure 1

Figure 2

Sound Trigger: This digital transmission kit has a unique sound trigger feature. Monitor beeps to alert

users when sound is above preset sound level. Users can adjust the sound trigger sensitivity by turning

the ‘trigger’ knob located in the right side of the camera (Figure 2).

Connect the monitor

Connect the monitor to a power outlet with supplied power adapter for the monitor. There are two options.

For desktop stand use, put the monitor into the monitor base, and then plug the power adapter to the

jack in the rear of the monitor base. Accordingly, the light in the front of the monitor base will be on. For

hand-held use, just plug the power adapter to the ‘DC 9V’ jack in the left side of the monitor, and the light

above the jack will be on. Then press the ‘power’ button in left side of the monitor the switch on the

monitor.

A/V Out: For Audio/Video output, plug the stereo end of the A/V cable to one of the ‘AV OUT’ jacks.

There are two Audio/Video output jacks, one is in the left side of the monitor, the other one is in the rear

of the monitor base, just beside the power jack.

Notes: When using the jack in the rear of the monitor base, image will be automatically displayed in the

external display device which is connected to the monitor base when the monitor is put onto the base.

Night Light: Press the night light button in the right side of the monitor to switch on/off the night light in

the camera, the function of this button is the same as the one in the top of the camera.

Alarm: For sound trigger feature, monitor beeps when sound is above preset sound level. The alarm