RDI Technology Co. Ltd. RX230 用户手册

 

 
 

 

15

If you have problems with your System, there is often a quick and simple solution. Please try the 
following: 
 

There is no picture from a Camera. 

•  Check all connections to the Camera. Make sure the 

adaptor is plugged in. 

•  Make sure that the Cameras and Receiver are both ON. 

•  Make sure that the receiver is set to search for the 

Camera (using the DIP Switch settings). 

•  Make sure that the camera is in range of the Receiver. 

•  If using the battery adaptor, try replacing the 9V Battery 
 

There is Interference with the 
Camera Picture. 

•  Make sure that each camera (transmitter) is within 

range, and that there are no large obstructions or 
interference (i.e. older cordless phones on the 900MHz 
Frequency). 

•  Try repositioning the camera, receiver or both to 

improve the reception. 

 

There are problems with the Audio. 

•  Ensure that the volume on the TV is ON 

•  Make sure that the sound is occurring within range of 

the Camera Microphone 

•  If the unit emits a loud screeching noise (feedback), 

move the camera or receiver farther apart. 

 

There is no image when the 
Receiver is connected to the 
computer using the USB Cable. 

•  Unplug and then plug in the Receiver. 

•  If the computer prompts you for a device driver, install 

the provided driver that is located on the CD (included). 
If the driver was installed and XP or Vista is still giving 
this prompt, please go to 

www.lorexcctv.com

 for 

customer service options. 

•  Run Windows Update to obtain the latest fixes for 

Windows. When update is complete, plug in the receiver 
to see whether this solved the issue. 

•  Ensure the computer is operating on Windows XP or 

Windows Vista. Other Operating Systems are not 
supported.. 

Yoics cannot find my camera, or 
other problems with the Yoics 
software. 

•  Ensure the driver is properly installed. 

•  Ensure only 1 camera is connected through USB. 

•  Please visit the Yoics website at 

www.yoics.com

  for all 

technical problems. 

The 2

nd

 camera is not showing up 

on Yoics. 

•  There can only be 1 camera shown at a time using 

Yoics, and there is no feature to switch between 
channels with Yoics. To change channels, press the 
MANUAL button on the receiver.