Cisco AC 27 CAB-C13-C14-JMPR= 用户手册
产品代码
CAB-C13-C14-JMPR=
Introduction
This document is a guide to cables and connectors for Catalyst 6500/6000, 5500/5000, and 4500/4000
series switching modules and Catalyst 2900/3500 XL, 2940, 2970, 2950/2955, 3550, and 3750 series fixed-
configuration switches. AC power supplies, connectors, and cords for these switches are also covered.
series switching modules and Catalyst 2900/3500 XL, 2940, 2970, 2950/2955, 3550, and 3750 series fixed-
configuration switches. AC power supplies, connectors, and cords for these switches are also covered.
Prerequisites
Requirements
You should identify the part or model number of your switch/supervisor, switching module, or power
supply in order to use this document effectively. Do this by visual inspection, or issue the
supply in order to use this document effectively. Do this by visual inspection, or issue the
command where possible.
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
Refer to
Console and Aux Port Cables
Different Catalyst Supervisor Engines use either a rolled or a straight-through cable in order to connect a
terminal or modem to the console port. Refer to these documents for information on how to connect a
terminal or modem to the console port of Catalyst series switches:
terminal or modem to the console port. Refer to these documents for information on how to connect a
terminal or modem to the console port of Catalyst series switches:
●
●
Auxiliary (AUX) ports on Layer 3 (L3) switches or modules behave much the same way as AUX ports on
routers and are used to connect modems. Refer to
routers and are used to connect modems. Refer to
how to connect a modem to an AUX port.