Racom RIPEX-154 用户手册
There is the distribution of rtt (round trip times) of received pings. Time intervals in the table
are 1/4 of the Timeout set in ping parameters. The XXXX... characters at the end of the line
form a simple bar chart.
are 1/4 of the Timeout set in ping parameters. The XXXX... characters at the end of the line
form a simple bar chart.
•
Buttons
Start - starts pinging
Stop - stops pinging, Statistic report is displayed afterwards
Clear - clears the reports on the screen
Stop - stops pinging, Statistic report is displayed afterwards
Clear - clears the reports on the screen
Monitoring
Fig. 7.14: Menu Monitoring
Monitoring is an advanced on-line diagnostic tool, which enables a detailed analysis of communication
over any of the interfaces of a RipEX router. In addition to all the physical interfaces (RADIO, ETH,
COM1, COM2), some internal interfaces between software modules can be monitored when such ad-
vanced diagnostics is needed.
Monitoring output can be viewed on-line or saved to a file in the RipEX (e.g. a remote RipEX) and
downloaded later.
Description of internal interfaces can be found below.
over any of the interfaces of a RipEX router. In addition to all the physical interfaces (RADIO, ETH,
COM1, COM2), some internal interfaces between software modules can be monitored when such ad-
vanced diagnostics is needed.
Monitoring output can be viewed on-line or saved to a file in the RipEX (e.g. a remote RipEX) and
downloaded later.
Description of internal interfaces can be found below.
•
Interfaces
Tick boxes:
Tick boxes:
115
© RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration