Racom RIPEX-154 用户手册
Note
it is recommended to do this only over reliable Ethernet connections and not over the
Radio channel.
Radio channel.
•
Archive to Active – when pressed, the Active firmware is substituted by the Archive firmware.
Either “All” or only “Only the different” versions are replaced according to the Versions list box
setting. The unit reboots itself afterwards.
Either “All” or only “Only the different” versions are replaced according to the Versions list box
setting. The unit reboots itself afterwards.
•
Copy Archive to Other unit – he Archive firmware package can be copied to another unit typically
over Radio channel. Fill in the IP address of the desired unit and press the button.
over Radio channel. Fill in the IP address of the desired unit and press the button.
Note
If possible, copy FW only over one Radio hop where radio link is quality sufficiently high.
Otherwise it can be very time consuming. When Router mode is used, don’t forget to
set correct Routing tables settings.
Otherwise it can be very time consuming. When Router mode is used, don’t forget to
set correct Routing tables settings.
7.6.4. Password
Fig. 7.19: Menu Maintenance Password
It is highly recommended to change default password (admin) even if the user name remains always
the same (admin). When the Apply button is pressed, the unit reboots.
the same (admin). When the Apply button is pressed, the unit reboots.
7.6.5. Miscellaneous
•
Reboot – when pressed, the unit correctly shuts down and starts again (performs the cold start
which equals to a power cycle). The reboot time is approx. 25 sec.
which equals to a power cycle). The reboot time is approx. 25 sec.
7.6.6. Technical support package
Fig. 7.20: Menu Maintenance Configuration
Technical support package is the file where some internal events are recorded. It can be used by RACOM
technical support when a deeper diagnostic is required. The most recent part of it can be downloaded
to the local PC.
technical support when a deeper diagnostic is required. The most recent part of it can be downloaded
to the local PC.
•
Log depth
List box: possible values
Default = 500
This is the number of rows downloaded. The greater the number of rows, the longer the history to
be found in the file. However more lines means greater file size as well. When downloaded from a
remote unit over Radio channel in poor signal conditions, a lower Log depth should be selected.
List box: possible values
Default = 500
This is the number of rows downloaded. The greater the number of rows, the longer the history to
be found in the file. However more lines means greater file size as well. When downloaded from a
remote unit over Radio channel in poor signal conditions, a lower Log depth should be selected.
RipEX Radio modem & Router – © RACOM s.r.o.
122
Advanced Configuration