Homewerks Worldwide LLC 7130-08-BT 用户手册

下载
页码 25
5
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package 
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble 
the product.  
`& _> * '&: + &/ ]; && {; &$ 4; ! Z; Z&;
Duct Tape, Phillips Screwdriver, Utility Knife
]&*& `& + &/ [& &&; !
WARNING: Turn off electricity at breaker box before beginning installation.
Carefully remove unit from carton.
Check area above installation location to be sure that wiring can run to the planned location and that 
K ' $ *( * 4&
Inspect duct work and wiring before proceeding with installation.
Before installation, provide inspection and future maintenance access at a location that will not interfere 
with installation work.
You may need the help of a second person to install this fan; one person on the attic side and one on 
the room side.
Z
Installations may vary depending on how the previous bath fan was installed. Supplies necessary  
for the installation of your bath fan are not all included; however, most are available at your local 
home improvement or hardware store.
DIMENSION REQUIREMENTS
Ceiling  
\" +~/
Ceiling  
\" +!/
Ceiling  
\" +]/
7-1/2 in.
X
X
WIRING DIAGRAMS
www.homewerksww.com
Motor
Capacitor
for long
life of 
motor
Bluetooth speaker
LED
Controller
Fan Housing
Junction Box
Automatic terminal 
switch
Fan Switch (Black)
Fan Neutral (White)
Green Wires
Neutral
Switch
Speaker/LED
switch to fan
switch
Neutral to
neutral
Ground
to 120V/60Hz
WIRING FOR 1 SWITCH OPERATION
Bluetooth speaker
LED
Motor
Capacitor
for long
life of 
motor
Controller
Fan Housing
Junction Box
Automatic terminal 
switch
Speaker/LED Switch (Black)
Speaker/LED Neutral (White)
Fan Switch (Black)
Fan Neutral (White)
Green Wires
Neutral
Switch
Neutral
Switch
Ground
WIRING FOR 2 SWITCH OPERATION
to 120V/60Hz