BMI Technologies Inc. RFVI 用户手册
G FORCE PLUS RF Instruction Manual
Apr/08
20
Doc #RF1 Rev.9
RF TRANSCEIVERS
The RF Transceivers are used to create a wireless communications link between the Vehicle Monitors and the
Software. The Host Transceiver has a physical connection to the computer. The Zone Transceivers are added
to extend the communications coverage area by placing each of them within range of the Host Transceiver.
Component Overview
Installation Steps
Follow the steps in the order below and refer to diagram in “Component Overview”.
1. Mount the Transceiver in the selected location.
The optimal location for a Transceiver and antenna is:
Where it will be safe from environmental hazards, possible impacts, and vandalism,
As high as possible from the floor,
At least two feet away from any large metal mass for best communications results,
As high as possible from the floor,
At least two feet away from any large metal mass for best communications results,
Use the base of the Transceiver as a template to drill four ¼-inch holes in the selected location
and attach the Transceiver using the hardware provided.
and attach the Transceiver using the hardware provided.
2. Mount and connect the antenna.
Attach the metal bracket provided to the selected location so the antenna will be vertical.
Insert the antenna into the bracket slot and secure the antenna by tightening the nut.
Prevent movement/vibration of the metal connector located between the short black and long
copper-colored antenna cables by securing them and protecting the connector if necessary.
copper-colored antenna cables by securing them and protecting the connector if necessary.