BMI Technologies Inc. RFVI 用户手册

G FORCE PLUS RF Instruction Manual 

 

 

Apr/08

Doc #RF1 Rev.9 

 

 

 
In the example above, when Vehicle PM’s are due within 24 hours (of Login or Motion time), the Vehicle 
Interface displays “OPERATOR LOGIN PM DUE SOON” during the Operator Login and 
“OPERATING MODE PM DUE SOON” during Operating mode. 
 
When PM’s become due after 24 hours, the Vehicle Interface displays “OPERATOR LOGIN PM DUE 
NOW” during the Operator Login and “OPERATING MODE PM DUE NOW” during Operating 
mode.   
 
If the “Automatic Maintenance Lockout On Past Due” checkbox is checked, Vehicles enter Maintenance 
Lockout at the next key-on after scheduled Preventative Maintenance is due.  The Vehicle Interface 
displays “MAINT LOCK OUT YYYY/MM/DD HH:MM” and the programmed Maintenance Lockout 
behavior exhibits (i.e. lift interrupt, etc.).  If the “Automatic Maintenance Lockout On Past Due” 
checkbox is not checked, the Vehicle will remain operable. 
 
 

 
Follow these steps for Preventative Maintenance to ensure proper record keeping in the Software: 
 
1.  Place the Vehicle into Maintenance Lockout. 

2.  Conduct the necessary Preventative Maintenance. 

3.  Remove the Vehicle from Maintenance Lockout as follows: 

a.  Turn the Vehicle ignition on. 

b.  Present an Unlock Card to the Vehicle Interface when it displays “MAINT LOCK OUT 

YYYY/MM/DD HH:MM”. 

c.  Remove the Card after the beep.  The Vehicle Interface will display “SCHEDULED PM 

COMPLETE? YES/NO”. 

d.  Press {Yes} on the Vehicle Interface to schedule the next Preventative Maintenance.  The Vehicle 

Interface will display “OPERATOR LOGIN PRESENT CARD”. 

4.  Complete a Maintenance Work Order with Scheduled PM selected as the reason.