BMI Technologies Inc. RFVI 用户手册
DRAFT G FORCE PLUS RF Instruction Manual
Doc #RF1 Rev.9
7
Apr/08
See “Initialize a Vehicle Monitor” for instructions on how functions 2, 3, 5, and 6 are used together to
program Vehicle settings from the Software to a Vehicle Monitor.
program Vehicle settings from the Software to a Vehicle Monitor.
See “SYSTEM DATA” for instructions on how functions 1 and 4 are used together to manually transfer
data from a Vehicle to the Software in the event of a breakdown in RF communications.
data from a Vehicle to the Software in the event of a breakdown in RF communications.
See “OTHER DATA LOGGER FUNCTIONS” for instructions function 9.
VEHICLE AND SOFTWARE INTERFACE TECHNIQUES
Both the Vehicle Interface and the Software Interface require interaction with Cards and with the Data
Logger. The methods of interaction are illustrated below:
Vehicle Interface and Cards
1. Hold the Card parallel to the face of the Vehicle Interface, making sure they are within 1” of each
other.
2. Listen for the Vehicle Interface buzzer to sound, or to stop sounding as the case may be. This
indicates the Card has been recognized.
3. Remove the Card from the Vehicle Interface and read the display for further information.
4. If the Vehicle Interface fails to recognize the Card, remove it from the Vehicle Interface by
approximately 12” and retry.
Vehicle Interface and Data Logger
1. Place the Vehicle into Maintenance Lockout.
2. Prepare the Data Logger for the interaction by selecting the desired function.
NOTE!
Press {Cancel} to return the Data Logger to “Action?(1-9)” at any time.