EnOcean GmbH PTM211C 用户手册
USER MANUAL
V0.9
EnOcean GmbH
Kolpingring 18a
82041 Oberhaching
Germany
Kolpingring 18a
82041 Oberhaching
Germany
Phone +49.89.67 34 689-0
Fax
Fax
+49.89.67 34 689-50
info@enocean.com
www.enocean.com
www.enocean.com
Subject to modifications
PTM 210 / 210C step EA User Manual V0.9
October 18, 2011 4:33 PM
Page 16/17
PTM 210 / 210C step EA User Manual V0.9
October 18, 2011 4:33 PM
Page 16/17
PTM 210 / 210C STEP EA
4
AGENCY APPROVALS
4.1 CE Approval (PTM 210 only)
The devices bear the EC conformity marking CE and conform to the R&TTE EU-directive on
radio equipment. The assembly conforms to the European and national requirements of
electromagnetic compatibility. The conformity has been proven and the corresponding do-
cumentation has been deposited at EnOcean. The PTM devices can be operated without
notification and free of charge in the area of the European Union, and in Switzerland. The
following provisos apply:
radio equipment. The assembly conforms to the European and national requirements of
electromagnetic compatibility. The conformity has been proven and the corresponding do-
cumentation has been deposited at EnOcean. The PTM devices can be operated without
notification and free of charge in the area of the European Union, and in Switzerland. The
following provisos apply:
EnOcean RF devices must not be modified or used outside their specification limits.
EnOcean RF devices may only be used to transfer digital or digitized data. Analog speech
and/or music are not permitted.
and/or music are not permitted.
The final product incorporating EnOcean RF devices must itself meet the essential re-
quirement of the R&TTE Directive and a CE marking must be affixed on the final product
and on the sales packaging each. Operating instructions containing a Declaration of Con-
formity has to be attached.
quirement of the R&TTE Directive and a CE marking must be affixed on the final product
and on the sales packaging each. Operating instructions containing a Declaration of Con-
formity has to be attached.
If transmitters are used according to the regulations of the 868.3 MHz band, a so-called
“Duty Cycle” of 1% per hour for each transmitter must not be exceeded. Permanent trans-
mitters such as radio earphones are not allowed. For conventional applications, it must be
ensured that the PTM 210 radio device is not operated more than 6000 times within one
hour (one operation: energy bow is pressed and released). Within this calculation, the ex-
traordinary short telegram length is considered including three subtelegrams. Also a toler-
ance of 5% in the telegram length is included.
“Duty Cycle” of 1% per hour for each transmitter must not be exceeded. Permanent trans-
mitters such as radio earphones are not allowed. For conventional applications, it must be
ensured that the PTM 210 radio device is not operated more than 6000 times within one
hour (one operation: energy bow is pressed and released). Within this calculation, the ex-
traordinary short telegram length is considered including three subtelegrams. Also a toler-
ance of 5% in the telegram length is included.
4.2 FCC/IC Approval (PTM 210C only)
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. If
this device is operated in compliance with the following requirements it can be operated
without notification and free of charge in the area of the United States of America and in
Canada. Operation is subject to the following two conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that
may cause undesired operation.
Trade Name: PTM 210C
Model No: PTM 210C
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions. (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interfe-
rence that may cause undesired operation.
FCC ID: SZV-PTM211C
IC: 5713A-PTM211C