YEALINK NETWORK TECHNOLOGY CO. LTD. T54S 用户手册

 

Click on

 

Account->Register->Account X (X=1, 2, 3...15, 16)

1. Press the 

OK key when the phone is idle to obtain the IP address of the phone. 

You can configure the network settings in the following ways:

It shows the register status of the current account.

You can select Enabled/Disabled to enable/disable the account.

It is shown on the LCD screen to identify the account.

It is shown as caller ID when placing a call.

It is provided by ITSP for registration (required).

It is an authenticated ID for authentication provided by ITSP (required).

It is provided by ITSP for registration (required).

It is provided by ITSP for registration (required).

 

By default, the phone attempts to contact a DHCP server in your network to obtain its valid network 

            settings, e.g., IP address, subnet mask, gateway address and DNS address.

Static IP Address: If your phone cannot contact a DHCP server for any reason, you need to configure the IP 

                              address, subnet mask, gateway address, primary DNS address and secondary DNS address 

                              for the phone manually. 

Press the

 

 

soft key when the phone is idle, select

 

Advanced (default password: admin)->Network->

WAN Port/VLAN/Web Server/802.1x/VPN/LLDP/CDP/NAT

 

to configure the network.

Press the

 

 

soft key when the phone is idle, select

 

Advanced (default password: admin)->Accounts to 

configure the account. 

2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" 

    or "192.168.0.10") and then press the 

Enter.

Register Status:            

Line Active:            

Label:                          

Display Name: 

User Name: 

Register Name: 

Password: 

Server Host: 

3. Enter the user name (default: admin) and password (default: admin) in the login page and click 

.

Network Settings:  Click on

 

Network->Basic->IPv4 Config

Registered

(Green)

3

Note:

 

Check with your system administrator if any error appears during the registration process or a specific 

         

Note:

 

For more information on account parameters, refer to

 

Configuring via web user interface above. 

configuration is required for your registration.

Note:

 

The IP phone also supports IPv6, but IPv6 is disabled by default.

          Wrong network settings may result in the inaccessibility of your phone and may have an impact on the 

          network performance. Contact your system administrator for more information. 

         

Register Failed

(Gray)

Registering

(Yellow)