YEALINK NETWORK TECHNOLOGY CO. LTD. W56H 用户手册

Network Settings

DHCP:  By default, the base station attempts to contact a DHCP server in your network to obtain the valid 

network settings, e.g., IP address, subnet mask, gateway address and DNS address.  

Static IP Address:  If the base station cannot contact a DHCP server for any reason, you need to configure the 

IP address, subnet mask, gateway address, primary DNS address and secondary DNS 
address for the base station manually.

You can configure the base station to obtain network settings in one of the following ways:   

3

To configure the network parameters for the base station manually: 

1.Press the OK key to enter the main menu, and then select Settings->System Settings ->Network.

3.Select desired type from the IP Address Type field.

2.Enter the system PIN (default: 0000), and then press the Done soft key.   

    4.Make the desired changes.

 

Shortcuts

1.Do one of the following to register your handset manually:  

2.Select the desired base and press the OK soft key. The handset begins searching the base.
3.Press the OK soft key after searching a base successfully. 

4.Enter the base PIN (default: 0000), and then press the Done soft key to complete registeration.

Handset Registration

This helps you get quick access to features by pressing the shortcut keys directly without having to scroll 
through the menu.You can press the following predefined shortcut keys to access some frequently used 
features when the handset is idle:

Press the left soft key to access the call history.
Press the right soft key to check the line status. 

 

Press      to place an internal call.

Press      to increase the ringer volume. 

5.Press the Save soft key to accept the change. 

Press      to access the directory.

Press      to decrease the ringer volume.  

Long press       on the base station till the registration LED slow flashes. Then press the OK key to 
enter the main menu on the handset, select Settings->Registration->Register Handset.

If the handset LCD screen prompts “Press base page 2s then press OK”,  long press       on the base 
station till the registration LED slow flashes. Then press the OK soft key on the handset, select Register 
Handset.            

PPPoE: If you are using an xDSL modem, you can connect your base station to the Internet via PPPoE 

mode. Contact the ITSP for the account and password.

Press          one or more times to switch among input modes or enter “#”. 

Press          to select the special characters or enter “*”. 

Press a digit key one or more times to enter the desired character or digit. 

Press the Del soft key to delete entered characters. 

Press the Save soft key to accept the change or        to cancel. 

Getting Started

Note: 

Wrong network settings may result in inaccessibility of your DECT phone and may have an impact on the 

        network performance. For more information on these parameters, contact your system administrator.

2

2

5

4

4

5

3

3

1

1

6

6

You can register up to 5 handsets to one base station. Each handset can be registered to 4 different base
stations.

Note: 

After the success of registration, the handset LCD screen prompts “Handset subscribed”. If the handset LCD 

        screen prompts “Searching for Base”, please check your base station if powered on.

Entering and Editing Data