Whirlpool Europe S.r.l. COMBOEMS00 用户手册

下载
页码 28
16
Cooking Power
Many recipes for microwave cooking specify which cooking 
power to use by percent, name or number. For example, 
70%=7=Medium-High.
Use the following chart as a general guide for the suggested 
cooking power of specific foods. 
Cooking
To Use:
1. Touch the number pads to set a length of time to cook.
If using 100% cook power, skip to Step 3.
2. Touch MICRO •• COOK POWER or UPPER •• COOK 
POWER then enter the desired power level. See “Cooking 
Power” chart.
3. Touch START.
The display will count down the cook time.
When the cycle ends, “End” will appear in the display, 4 end-
of-cycle tones will sound, and then reminder tones will sound 
every minute.
4. Touch UPPER OVEN CANCEL or CANCEL OFF or open the 
door to clear the display and/or stop reminder tones.
The cook time and cooking power can be changed after touching 
START without interrupting cooking.
To Change Cook Time: Touch MICRO •• COOK POWER or 
UPPER •• COOK POWER once. Enter the new cook time within 
5 seconds. Touch START, or wait 5 seconds and the change will 
be entered automatically.
To Change Cooking Power: Touch MICRO •• COOK POWER or 
UPPER •• COOK POWER twice. Enter the new cook power 
within 5 seconds. Touch START, or wait 5 seconds and the 
change will be entered automatically.
Cooking in Stages
The microwave oven can be set to cook at different cooking 
powers for various lengths of time, up to 3 stages.
To Cook in Stages:
1. Touch the number pads to set a length of cook time for the 
first stage.
2. Touch MICRO •• COOK POWER or UPPER •• COOK 
POWER and then enter a cook power (if other than 100%) 
from the Cook Power Chart.
3. Touch MICRO •• COOK POWER or UPPER •• COOK 
POWER to start programming next stage.
4. Repeat the above steps for second- and third-stage 
programming.
The numbers “1,” “2” and/or “3” will appear in the upper oven 
display during programming.
5. Touch START when cook times and cook powers have been 
entered.
The upper oven display will count down each of the cook 
times. The numbers “1,” “2” or “3” will appear in the display 
during their respective stages.
When the cycle ends, “End” will appear in the display, 4 end-
of-cycle tones will sound, and then reminder tones will sound 
every minute.
Cook time may be changed during any cycling stage by 
touching MICRO •• COOK POWER or UPPER •• COOK 
POWER once, and then entering the new time within 
5 seconds. Time may be added in one-minute increments by 
touching EASY MINUTE (START) during the cycling stage.
6. Touch UPPER OVEN CANCEL or CANCEL OFF or open the 
door to clear the display and/or stop reminder tones.
PERCENT/
NAME
NUMBER USE
100%, High 
(default setting)
10
Quick heating convenience 
foods and foods with high water 
content, such as soups, 
beverages and most 
vegetables.
90%
9
Cooking small tender pieces of 
meat, ground meat, poultry 
pieces and fish fillets.
Heating cream soups.
80%
8
Heating rice, pasta or 
casseroles.
Cooking and heating foods that 
need a cook power lower than 
high. For example, whole fish 
and meat loaf.
70%,
Medium-High
7
Reheating a single serving of 
food.
60%
6
Cooking sensitive foods such as 
cheese and egg dishes, 
pudding and custards.
Cooking non-stirrable 
casseroles, such as lasagna.
50%, Medium
5
Cooking ham, whole poultry and 
pot roasts.
Simmering stews.
40%
4
Melting chocolate.
Heating bread, rolls and 
pastries.
30%, Medium-
Low, Defrost
3
Defrosting bread, fish, meats, 
poultry and precooked foods.
20%
2
Softening butter, cheese, and 
ice cream.
10%, Low
1
Taking chill out of fruit.