TP-Link Technologies Co. Ltd. WR1043NDV2 用户手册

 

)

1.  New firmware versions are posted at http://www.tp-link.com and can be downloaded for free. 

There is no need to upgrade the firmware unless the new firmware has a new feature you 

want to use. However, when experiencing problems caused by the router rather than the 

configuration, you can try to upgrade the firmware. 

2.  When you upgrade the router's firmware, you may lose its current configurations, so before 

upgrading the firmware please write down some of your customized settings to avoid losing 

important settings. 

3.  Do not turn off the router or press the Reset button while the firmware is being upgraded.

 

Loss of power during the upgrade could damage the router.   

4.  The firmware version must correspond to the hardware.   

5.  The upgrade process takes a few moments and the router restarts automatically when the 

upgrade is complete.   

Choose menu “System Tools →  Factory Defaults”, and then and you can restore the 

configurations of the router to factory defaults on the following screen 

 

Figure 4-100 Restore Factory Default 

Click the Restore button to reset all configuration settings to their default values.   

• 

The default User Name: admin 

• 

The default Password: admin 

• 

The default IP Address: 192.168.0.1 

• 

The default Subnet Mask: 255.255.255.0 

)

All changed settings will be lost when defaults are restored. 

Choose menu “System Tools → Backup & Restore”, and then you can save the current 

configuration of the router as a backup file and restore the configuration via a backup file as 

shown in Figure 4-101. 

-97-