TP-Link Technologies Co. Ltd. WR841NV13 用户手册

8

Chapter 2

Connect the Hardware

5 )  Verify that the hardware connection is correct by checking these LEDs.

Power

On

Internet

On

Wi-Fi

On

Tips: If Wi-Fi LED is off, press and hold the WPS/Wi-Fi button until it is on.

2. Connect your computer to the router.
•  Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.

1

2

3

4

WPS/

RESET

WIFI

ON/OFF

1

2

3

4

WPS/

RESET

WIFI

ON/OFF

Ethernet cable

•  Method 2: Wirelessly
1. Find the SSID (Network Name) and Wireless Password printed on the label at the 

bottom of the router.

2. Click the network icon of your computer or go to Wi-Fi Settings of your smart device, 

and then select the SSID to join the network.

OR

Connections are available

Wireless Network Connection

TP-LINK_XXXX

TP-LINK_123

Connect automatically

Connect

Wi-Fi

Wi-Fi

 

TP-LINK_XXXX

TP-LINK_123

CHOOSE A NETWORK...

Other...

< 

Settings

Smart Device

Computer

•  Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB 
network cards, can be connected to your router through this method. (WPS is not 
supported by iOS devices).

Note:

The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will 
be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured 
with the appropriate encryption before configuring the WPS.

1. Tab the WPS icon on the device’s screen.
2. Immediately press the WPS button on your router.