ELK Products Inc. ELK-6010 External Photos
The data portion of the received packet at the M1XRFTW is translated into a standard RF
receiver data packet and sent to the ELK M1 Security and Automation Controller for further
processing.
The status LED consists of a Red and Green LED. Holding a button pressed for approximately
1.5 seconds will return the armed/disarmed or alarm status from the M1 Controller. A Green LED
indicates that the M1 is disarmed. A Red LED indicates the M1 is armed and a flashing Red LED
indicates that the alarm memory is active and an alarm has occurred since the last arm/disarm
cycle. If the ELK-6010 does not receive an acknowledgment, no LED will illuminate.
receiver data packet and sent to the ELK M1 Security and Automation Controller for further
processing.
The status LED consists of a Red and Green LED. Holding a button pressed for approximately
1.5 seconds will return the armed/disarmed or alarm status from the M1 Controller. A Green LED
indicates that the M1 is disarmed. A Red LED indicates the M1 is armed and a flashing Red LED
indicates that the alarm memory is active and an alarm has occurred since the last arm/disarm
cycle. If the ELK-6010 does not receive an acknowledgment, no LED will illuminate.
ELK-6010 Front Case View: