Datastrip Inc. DSV2SC01 用户手册
DSV2+
Turbo
User Manual, Version 1.09
33
Copyright © 2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
•
In the directory Storage Card/DSVII run the utility “DsVerifyCleanUp” and select the
option “Clear SCM Firmware”. Answer “OK” to the question “Are you REALLY sure”
•
Reboot or Suspend as required
•
When the device is finished booting double tap My Computer and select Storage Card /
DSVII.
•
Open the folder “DSVII_SCM_Firmware”. Verify the new firmware is in the folder:
“SCR331-DI_HW_140_FW_632”
•
Double tap the utility “FlashIt”
•
Tap the button “Open bin file” and navigate to:
StorageCard/DSVII/DSVII_SCM_Firmware
•
Select “SCR331-DI_HW_140_FW_632”and click OK
•
Status should read “Binary file is valid.
•
Tap the button “Download”
•
Reboot to complete update.
8.4 Loading Digital Still Camera Firmware Updates
The DSC Firmware Update Utility is a “stand-alone” program which can be used to update the
camera module’s firmware. The procedure for updating the Digital Still Camera firmware is as
follows:
camera module’s firmware. The procedure for updating the Digital Still Camera firmware is as
follows:
•
In the directory “Storage Card/DSVII” run the utility DSC_Firmware_update.exe.
•
The application displays the current version number of the camera firmware and asks the
question “Do you want to update the camera firmware? “
•
If you answer “Yes” then browse to the directory “Storage
Card/DSVII/DSVII_DSC_Firmware”, select the latest firmware version and double-click
on it, or select it and hit “OK”.
on it, or select it and hit “OK”.
•
Wait for the camera to update its firmware (approx 15 seconds). Note: After the firmware
is updated, the camera illumination LED will blink 10 times.
•
Turn the DSV2+ off and then back on to activate the new firmware.
8.5 Loading PIC Firmware Updates
The procedure for updating the PIC firmware is as follows:
•
In the directory “Storage Card/DSVII” run the utility DatastripDsVerify2PICUpdate.exe.
•
When the dialog box opens that reads “Select valid PIC HEX File” click the small box
and navigate to the directory /Storage Card/DSVII/DSVII_PIC_Firmware
•
Double tap the latest release e.g. “PIC_FW_V401.hex” to select it.
•
Click the button “Update PIC Firmware”.
•
Reboot to complete update.