SPRINGCARD SAS PRNHSP01 用户手册
PMD2271-BA
page 95 of 118
S
PRING
C
ARD
PC/SC C
OUPLERS
- H663
GROUP
- Developer's reference manual
6.3.5.
Forced insert/remove sequences
Use these sequences to emulate card insertion or removal. This is useful for hardware where no
“card presence” switch is available.
Pay attention that if no card is actually present when the Card insertion is performed, the H663
will be busy a long time (for nothing), before eventually giving up and reporting the “card mute”
Pay attention that if no card is actually present when the Card insertion is performed, the H663
will be busy a long time (for nothing), before eventually giving up and reporting the “card mute”
status.
DO NOT use this feature unless explicitly advised by SpringCard's support team.
a.
Card insertion
Sequence
Action
58 40 01 01
Simulate a card insertion in the 1
st
card slot (ID-1 slot if existing)
58 40 01
Simulate a card insertion in the current slot
b.
Card remove
Sequence
Action
58 40 01 00
Simulate a card removal from the 1
st
card slot (ID-1 slot if existing)
58 40 00
Simulate a card removal from the current slot
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.