Outsite Networks Inc. APX-2012 用户手册
AllPoints Keypad Installation Manual
Page 15
11.2.12.
Configure the Volume Level
Use the Volume Level item to increase the audio volume level. By default the AP
Keypad volume level will be set to “4”.
The Volume Level range is “0” to “9”.
To change the Volume level, press 1/4 or the “1” key followed by the “4” key again.
Then follow the printed directions.
12. Connect the AllPoints Keypad to the Internet
The AP Keypad Server Unit requires an Internet connection to function properly. After
configuring the AP Keypad Server unit per the Section 11 of this document, use the AP
Keypad RJ45 Ethernet port on the back of the unit to connect the server unit to the
Internet.
13. AllPoints Keypad final check-Out
After all of the AP Keypad units to be installed are configured and the server unit is
connected to the Internet, contact the ONI Service department at 1-800-371-1118 to
complete the AP Keypad server configuration remotely. The ONI Service Department is
available to remotely configure units between 8:00 a.m. EST and 6:30 p.m. EST, Monday
through Friday.
When contacting the ONI Service department have the Server Site ID number, Site
Name, address and telephone number available. The Service Technician will need this
information.