S and C Electric INTELLICOM 用户手册

 

                                                      S&C Instruction Sheet 1069-500      3

Safety

Safety Procedures For Working At Heights

•  Select equipment locations that will allow safe and simple 

installation.

•  Don’t work alone. A friend or co-worker can save your life if an 

accident happens.

•  Don’t attempt repair work when you are fatigued.
•  Use approved non-conducting ladders, shoes, and other safe-

ty equipment. Make sure all equipment is in good condition.

•  If a tower or pole begins falling, don’t attempt to catch it. 

Stand back and let it fall. 

If a wire or pole does come into contact with a power line, never 

touch it or attempt to move it. To prevent electrocution, call 

the electric utility company immediately.

restors.  This will help prevent fire damage or human injury in 

case of lightning, static build-up, or short circuit within equip-

ment connected to the antenna.

•  The S&C IntelliCom WAN Mesh Radio has built-in lightning 

protection, but antennas still need their own lightning protec-

tion. Be sure that any other equipment connected to the Itel-

liCom radio has the same level of protection.

•  The base of the antenna pole or tower must be connected 

directly to the building protective ground or to one or more 

approved grounding rods, using 10 AWG ground wire and 

corrosion-resistant connectors

•  Refer to the National Electrical Code for grounding details.

If an accident occurs with the power lines: don’t touch that per-

son, or you may be electrocuted.
•   Immediately call for medical help.
•  Use a non-conductive dry board, stick, or rope to push or 

pull them to safety so they are no longer in contact with 

electrical power.

•  Once they are no longer contacting electrical power, admin-

ister CPR if you are certified.