Intelicis Corporation CEDAR880AG 用户手册

 

                                                                                 

                                                                                

Cedar 880AG Enterprise Dual-Radio AP/Bridge

 

      Could not find valid MAC address for enet0.  Using default! 
      Ethernet eth0: MAC address 00:03:7f:e0:02:bf 
      IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.1.237 
      Default server: 192.168.1.237, DNS server IP: 192.168.1.237 

 

      RedBoot(tm) bootstrap and debug environment [RAM] 
      Non-certified release, version v2_0 - built 18:22:58, May 13 2006 

 

      Copyright (C) 2000, 2001, 2002, Red Hat, Inc. 
      Copyright (C) 2005, Devicescape Software, Inc. 

 

      RAM: 0x80010000-0x81000000, 0x8006ad50-0x80fe1000 available 
      FLASH: 0xbe000000 - 0xbe7e0000, 126 blocks of 0x00010000 bytes each. 
      == Executing boot script in 4.000 seconds - enter ^C to abort 
      RedBoot> load -r -v -b 0x80100000 FwFlash.img 

 

      Raw file loaded 0x80100000-0x8087ffff, assumed entry at 0x80100000 
      RedBoot> burnflash 
      ** Flash burning process would take a while. Please wait. 
      ** Complete flash image burning successfully. 
      ** System is rebooting... 

 
6.  Now you should be able to gain access to the unit again and upgrade its firmware by 

the normal procedure described in Chapter 4.  

 
 
 

                                                                       

 

 

 

 105