KCodes Corporation KCODES-604N 用户手册
32
Chapter7 Restore Factory Defaults
You may restore the Server’s default parameters by one of the following methods.
7.1
Using the Server’s Web Pages
1. Go to the Server’s web page and click CONFIG
2. Enter administrator (default: admin) and password (default: admin).
2. Enter administrator (default: admin) and password (default: admin).
3. Click Maintenance.
4. Click Factory Default.
4. Click Factory Default.
5. Click Yes to confirm
7.2 Using
Init
Button
Plug in the power adaptor while pressing the Init button until LED indicators of USB1
and USB2 blink. (For Kcodes 601/601n, only USB LED will blink.) After that, plug off
the power adaptor and then plug in the power adapter again to restart the Server.
Finally, the Server will operate using the Factory Default values.
7.3
Default Parameters List
General Information
z Server Name:
KC601 (for KCodes 601) or KC601n (for KCodes 601n) or KC604
(for KCodes 604) or KC604n (for KCodes 604n)